Root LG G2 Lollipop 5.0.2 using TWRP and Install Magisk (All Variants)

LG G2 is an Important mobile for LG. After this mobile success, a lot of people move to this Manufacturer. If this mobile is in good condition, It will be either Primary phone or secondary phone for most of the people. It is like having a New Mid-range phone now. But, the problem is Software. It comes with the KitKat version. LG Stopped Major upgrades after Lollipop version. If we flash Custom ROM, we can expect a lot of Improvements in Performance and UI. You should have Custom Recovery like TWRP installed on your mobile. In the right side, there is the official version of Lineage OS 16.0 version available. The benefit of the official version is it is free from significant bugs. And Also it will receive regular patch updates. There are plenty of methods that are available to root your mobile. Here I provided a simplified version of this process. All Carriers, including USA and Canada versions, can be rooted using this method.

Why should you Root LG G2?

We appreciate the hard work of the TWRP team and XDA Developer- avicohh. Without them, this Root method is not possible. Your mobile has 2 GB of RAM. It is enough for normal usage. But, LG stopped Security patch updates. Also, It is based on Old OS, So we can’t expect Many optimizations. It has a Qualcomm MSM8974 Snapdragon 800 processor. So, If we Install Custom ROM, We can expect some Improvements.

Due to Poor RAM Management in Old device, you will feel laggy. If we optimize correctly with correct Custom OS after rooting, we can see some Improvements. So, after rooting, I can expect Lag-free experience? Probably. Also, if we hibernate and eliminate a lot of unwanted apps and optimize some apps, your device is hardware limited. But, within these limits, we can enhance the performance by 20-30% compared with your old usage. If you use Lite weight Custom ROMs, you can expect a 40-80% improvement in performance based on what custom OS you are choosing.

How to Root LG G2 Lollipop 5.0.2 (D800 (AT&T), D802 (Europe), D801 (T-Mobile), D802TA (Australia), D803 (Canada), VS980 (Verizon); LS980 (Sprint), Unlocked)

LG G2 International Variants comes with a flexible bootloader other than some locked devices. Example- In Samsung, Verizon mobiles come with locked Bootloader. We can Unlock your Bootloader using the script. This means that different smartphone variants can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike.

TWRP recovery is a custom recovery file which must be installed on your devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on LG G2. However, the tool required for rooting this device is the Magisk App.

With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your LG G2 to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.

Things to check out for;

• Make sure your device battery is charged above 50%

• Backup your current files and data, full data loss process (save them on external storage).

• This method will Unlock your Bootloader.

• You should not disconnect your mobile during the whole process.

• Don’t close the LG One Click Tool. It should run until the process done.

• You should use a Laptop or Power Backup PC. The process should not be interrupted in the middle.

Pre-Requirement Steps

• Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode, OEM Unlock. There is no complicated process in the LG G2.

• Also, download the ADB drivers and LG USB Driver. Install both files on your PC.

• Download LG One Click Root v1.2 / Mirror and save it in your PC. Extract the file. Install the data in your PC.

Flash TWRP and SuperSu using LG One Click Tool

• Open One-Click Tool. Connect your mobile to PC using USB Cable.

• After you get the “Device detected” message, the SuperSu Script should run within a few minutes. If the script didn’t run, Unplug your mobile and restart the whole process.

• The script will install SuperSu on your mobile successfully after the flash follows on-screen Instructions.

• Press ctrl+c and Type “N” and press enter to Reboot your mobile.

• You will be booted into Recovery mode. The app already pushed SuperSu file. So, there is no need to transfer the data on your own.

• After booting into TWRP, Select Wipe->Advance Wipe->Select Cache Data.

• Select-> Backup ->Take complete Backup.

• After the Successful Backup, return to the home of TWRP and Select “Reboot System.” Now you have rooted mobile with SuperSu app. If you want to install Magisk, move to below steps. If you are satisfied with the SuperSu app, you can ignore the below step.

Install Latest TWRP Using the Flashify app (Optional)

• If you need the latest version of TWRP, you can Install the file using below method. If you feel you are ok with the Old version, you can ignore this step.

• Download Flashify Apk.

• Download TWRP Official File (AT&T, Canada, Korea F320K, Sprint, T-Mobile, Verizon), D802.

• Open Flashify app and Install the TWRP. Don’t Boot into recovery using Flashify app. Switch off your mobile and Boot using Volume Up+ Power Button keys. You should not boot into your mobile until all the necessary files installation using TWRP.

Install Magisk on your LG G2 using TWRP

• Download Magisk.Zip (Latest Version) and Copy it to Your External SD card storage.

• Switch off your mobile. Boot into recovery mode-> Volume Down + Power Button.

• Select Wipe->Advance Wipe->Select Cache Data.

• Return to Home of TWRP select Install.

• Select Magisk.Zip.

• After the Successful Installation, Reboot your mobile.