Root Samsung Galaxy J6, On6 SM-J600F Oreo using TWRP

After the successor of J7 Series, Samsung planned another Budget series with J6. Decent amount of 4 GB RAM with Expandable Memory. With Exynos 7870 Octa-Core processor, It is a very decent phone. As Always you know, We Root our mobiles mostly to Remove the bloatware. That’s what we are going to do in the following Article. Some regions, this model is called as Samsung Galaxy On6.

Why should you Root Samsung Galaxy J6?

Trust me the software is worse. Lots of lag with hang sometimes. If you use your mobile in a Long time, you can notice this issue. If you check in the background, You can see some unnecessary apps running. We should get rid of this.

How to Root Samsung Galaxy J6 SM-J600F?

Samsung Galaxy J6 Internationa variant comes with a flexible bootloader. This means that the smartphone can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike.

TWRP recovery is a custom recovery file which must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy J6. However, the tool required for rooting this device is the SuperSu Beta App.

With the help of TWRP Recovery, you can quickly flash the latest version of SuperSu into your J6 to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.

Things to check out for;

• Check your device model number.

• Select TWRP Based on the mobile model number.

• Make sure your device battery is charged above 50%

• Backup your current files and data, just in case (save them on external storage).

Pre-Requirement Steps

• Enable USB Debugging Mode and OEM Unlock in your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy J6.

• Download and install the Samsung USB driver to your computer system.

• Also, download the ODIN software. Select above Oreo version in the ODIN list. Install ODIN in your PC.

• Download SuperSu.Zip and Copy it to Your Phone Memory.

• Download and save the TWRP File. Please select correct model number TWRP file.

• ( SM-J600F )

Flash TWRP using ODIN

 

• Connect your USB Cable with PC. Switch off your device. Then, enter into Download mode. To do this; press and hold down the Volume Down + Volume Up buttons at the same time and connect your micro USB Cable.

• Press the Volume Up button to continue when you see the warning message.

• Now, connect the J6 mobile to the computer via USB cable.

• Launch the Odin app on your computer. If the device is detected by this app (Odin), it will show you a message that reads – added!!!

 

However, if the device is not correctly connected to the PC, you won’t see this message. So, you have to check the USB cable if it is good and reconnect the device.

• After connecting the Samsung device, click on the PDA/PA button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and tick the Auto Reboot.

• Click on “Start”

• Once the file is loaded into the device, reboot your device.

• Kudos, you have just Installed the TWRP/CF-Auto-Root on your Samsung Galaxy J6. If you installed TWRP, Don’t turn on your mobile. Immediately, move to SuperSu Installation steps.

Install SuperSu in your Samsung J6 using TWRP

• Boot it Into recovery mode->Volume Up +Power Button.

• Now it Will Boot into TWRP Recovery Mode.

• Select Wipe->Advance Wipe->Select Cache Data.

• Return to Home of TWRP select Install.

• Select SuperSu.Zip.

• After the Installation Reboot Your Mobile.