Root Samsung Galaxy A50s SM-A507FN Pie 9.0 using Magisk

Samsung Galaxy A50s comes with Special design. They said It would be given Prism reflects in the back, most of the Angle. Yes, It is an excellently designed device. Not only in the design, both Hardware and Software are also best. It comes with One UI based on Pie 9.0 version. By default, you can customize a lot of things in the UI. But, when you want to control everything, you need root access. If you are a regular user, you don’t need root unless you have a specific reason. Below we are going to use Magisk only method. It is not like the TWRP method. You can’t install Custom ROMs. But, When your purpose is using root apps, this method will help you a lot. If you are a developer or regular root apps user, you can follow the below process to achieve root on your mobile.

Why should you Root Samsung Galaxy A50s?

You should have a strong reason for rooting. Samsung Already released One UI 9.0 Pie and is already optimized. You have More than Enough 4/6 GB RAM to use daily apps without Lag for years. Yes, I know, you may think, Samsung Custom Skin OS can make some problem. But, Trust me One UI is far better than other Custom Skin OS. You can use this device without lag for years until Samsung mess with some Bloatware. But beyond, this not go reasons, you are addicted to some root apps, or you are a frequent user of some Custom OS, you can proceed further. But if you want to root because everybody is doing, I advise you, don’t root If you didn’t have any experience. For regular users, It can become a Nightmare.

How to Root Samsung Galaxy A50s SM-A507FN Pie 9.0

First of all, thanks to topjohnwu – this genius is one who discovered and maintaining Magisk. We also thank XDA Developer- corsicanu, ajnajao1, Who suggested this method.

Samsung Galaxy A50s International variants come with a flexible bootloader. This means that the smartphone can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike. Don’t try with Snapdragon US Variants like Verizon devices. They come with locked Bootloader.

But In the below method, we are going to Root this device by using Magisk. You can install TWRP using the official App when it is released. TWRP recovery is a custom recovery file which must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy A50s. However, the tool required for rooting this device is the Magisk App.

With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your A50s to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.

Things to check out for;

• Check your device model number.

• Install Latest Magisk Manager.

• Make sure your device battery is charged above 50%

• Backup your current files and data- Full Data Loss Process (save them on external storage).

• You cannot use Samsung Pay, Secured folder, and some official apps from Samsung.

• You can’t update your firmware, to get new firmware you have to follow the below steps with the latest firmware.

• Read full tutorial before the process.

Pre-Requirement Steps

Unlock Bootloader

• Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy A50s.

• Switch off your device. Enter into Download Mode-> Volume Down+Volume Up and Connect your mobile with PC using USB Cable. When Download mode warning screen Appears, Press Volume Up button to unlock Bootloader.

• The above process will wipe your User Data. After Setup your device, Please recheck the OEM Unlock in the settings. Sometimes It Will Lock Again.

Preparing Patched Boot Image file

• Download and install the Samsung USB driver to your computer system.

• Also, download the ODIN software. Select above Oreo version in the ODIN list. Install ODIN on your PC.

• Download Samsung Galaxy A50s Firmware and save it on your PC. Your Current OS version and Downloaded Version AP and CSC should be Same.

• You can use Phone Info to know your firmware version.

• Download 7Zip-ZS Install on your PC. Extract the files in downloaded firmware using 7Zip-ZS. You will get four data. Copy “AP.tar.md5” file to your mobile.

• Download Magisk Manager (Download Latest version) or Magisk canary and Install it on your mobile. Open Installed Magisk and Select Install in Magisk, It will ask For zip file and Patch Boot Image File. Select the Boot Image file.

• Navigate to your copied Boot Image File and patch the file.

• Wait for the process to complete, In the end, you will get magisk patched .tar file. The .tar file will be in the same folder where you have the Stock firmware file.

• Copy magisk_patched.tar file to your PC.

Flash Patched Boot Image using ODIN

• Switch off your Mobile. Enter into Download mode->Volume Down+ Volume Up Buttons and Connect Your Mobile To PC via USB Cable, After Samsung Logo Appear, Release all keys.

• After entering into Download Mode, it will say Warning, Press Volume Up button to continue.

• Launch Odin Application.

• It Will Show the message added.

• If you did not get this message Repeat the above steps.

• After Getting Added Message Select, AP/PDA Button then Browse for the magisk patched file selects it. All other three files should be Unpatched and Extracted from the firmware. So, Now you got four files in the ODIN. Un-Tick the Auto-Reboot.

• Press Start wait for the tasks to complete. After the process complete, Press Volume Down+ Power button to exit Download mode. When the screen goes off, Immediately Press Volume Up+ Volume Down + Power buttons to boot into Recovery mode.

• After entering into Stock recovery mode, Go to Wipe Data/Factory Reset and Select Yes to wipe data. It will erase your saved data in your device. Don’t Boot into OS, Read below Boot stages before booting.

Boot into Rooted OS

• Press and Hold Volume Up + Power buttons, release all the keys once the Bootloader warning appears. You have to set up your device like a new device. You can check the root status using Root Checker.

• Stock Recovery Boot – Press and Hold Volume Up + Power buttons, release keys while you hold the Volume Up key.

• You will see Magisk Manager in your App drawer. If you can’t find the app, you can install Magisk Manager in your mobile.