• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
Android Infotech

Android Infotech

Android Tips, News, Guide, Tutorials

  • Applications
  • Knowledge
  • I’m Bored
  • Opinion
  • Tutorial
  • Root
  • Firmware
  • Daily Deals
Home » Root » Root Samsung Galaxy Core Prime SM-G360 KitKat, Lollipop 5.1.1 using TWRP

Root Samsung Galaxy Core Prime SM-G360 KitKat, Lollipop 5.1.1 using TWRP

Last updated on May 24, 2019 By Selva Kumar ALeave a Comment

Samsung Galaxy Core Prime received Up to Lollipop version. But some model numbers didn’t receive Lollipop version. We mentioned all model numbers which can be rooted with the following TWRP method. If you root using TWRP, you can Install custom ROM, which can perform better compared with Custom Skin OS- Samsung TouchWiz. If you still use this mobile, you know how difficult it is to use this. Your mobile will hang frequently and restarts. It can happen with a simple Call log Opening. We can get rid of some issues, But we can’t expect more Performance, Because we have only 1 GB of RAM.
Samsung Galaxy Core Prime with Leafs Background

Table of Contents

  • Why should you Root Samsung Galaxy Core Prime?
  • How to Root Samsung Galaxy Core Prime SM-G360 Lollipop 5.1.1 (SM-G3606, SM-3608, SM-G3609, SM-G360BT, SM-G360F, SM-G360FY, SM-G360GY, SM-G360H, SM-G360HU, SM-G360M, SM-G360P, SM-G360R6, SM-G360T, SM-G360T1)
    • Things to check out for;
    • Pre-Requirement Steps
    • Flash TWRP using ODIN
    • Install Magisk in your Samsung Galaxy Core Prime using TWRP
  • What More?

Why should you Root Samsung Galaxy Core Prime?

We thank Hard work of TWRP team. Your mobile has only 1 GB of RAM. It is not enough for Normal usage. Also, Samsung stopped Security patch updates on 60-90 days Interval. Also, It is based on Old OS, So we can’t expect Many optimizations. It has a Qualcomm MSM8916 Snapdragon 410 processor.

Due to Poor RAM Management in Old device, you will feel laggy. If we optimize correctly with correct Custom OS after rooting, we can see some Improvements. So, after rooting, I can expect Lag free experience? Probably. Also, if we hibernate and eliminate a lot of unwanted apps and optimize some apps, your device is hardware limited. But, within these limits, we can enhance the performance by 30-40% compared with your old usage. If you use Lite weight Custom ROMs, you can expect a 50-80% improvement in performance based on what custom OS you are choosing.

How to Root Samsung Galaxy Core Prime SM-G360 Lollipop 5.1.1 (SM-G3606, SM-3608, SM-G3609, SM-G360BT, SM-G360F, SM-G360FY, SM-G360GY, SM-G360H, SM-G360HU, SM-G360M, SM-G360P, SM-G360R6, SM-G360T, SM-G360T1)

Samsung Galaxy Core Prime International variants come with a flexible bootloader. This means that the smartphone can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike.

TWRP recovery is a custom recovery file which must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy Core Prime. However, the tool required for rooting this device is the Magisk App.

With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your Core Prime to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.

Things to check out for;

  • Check your device model number.

  • Select TWRP Based on the mobile model number.
  • Make sure your device battery is charged above 50%

  • Backup your current files and data, just in case (save them on external storage).

Pre-Requirement Steps

Enabling developer option

  • Enable USB Debugging Mode and OEM Unlock in your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy Core Prime.

  • Download and install the Samsung USB driver to your computer system.

  • Also, download the ODIN software. Select above Marshmallow version in the ODIN list. Install ODIN in your PC.

  • Download Magisk.Zip (Download Latest version), Copy it to Your Phone Memory.
  • Download and save the TWRP File. Select Correct TWRP file from Below. This TWRPs can support Up to Lollipop.

  • twrp-3.3.1-0-core33g.img.tar

Flash TWRP using ODIN

Samsung Galaxy Core Prime Download Mode

 

  • Connect your USB Cable with PC. Switch off your device. Then, enter into Download mode. To do this; press and hold down the Volume Down + Home + Power buttons and connect your micro USB Cable.

Samsung Galaxy Core Prime Download Mode Warning Screen

 

  • Press the Volume Up button to continue when you see the warning message.

  • Now, connect the Samsung Galaxy Core Prime mobile to the computer via USB cable.

  • Launch the Odin app on your computer. If the device is detected by this app (Odin), it will show you a message that reads – added!!!

ODIN Added Message

 

However, if the device is not correctly connected to the PC, you won’t see this message. So, you have to check the USB cable if it is reasonable and reconnect the device.

  • After connecting the Samsung device, click on the PDA/PA button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and un-tick the Auto Reboot. Or Else it will boot into Stock Recovery even after the “Success” flash.

Odin Auto Reboot

  • Click on “Start”

  • Once the file is loaded into the device, reboot your device.

  • Kudos, you have just Installed the TWRP on your Samsung Galaxy Core Prime. If you installed TWRP, Don’t turn on your mobile. Immediately, move to Magisk Installation steps.

Install Magisk in your Samsung Galaxy Core Prime using TWRP

  • Boot it Into recovery mode->Volume Up + Home + Power Button.
  • Now it Will Boot into TWRP Recovery Mode.
  • Select Wipe->Advance Wipe->Select Cache Data.
  • Return to Home of TWRP select Install.
  • Select Magisk.Zip.
  • After the Installation Reboot Your Mobile.
  • You can also install Magisk.apk in your Mobile Applications.

What More?

You should not Boot into Normal OS Booting, after TWRP. After TWRP Flash, Immediately Boot into Recovery or Else you will get Warning message FRP Lock. If you accidentally urged and boot frequently, Don’t panic, flash official Core Prime stock firmware to get back into stock OS.

Selva Kumar A

Selva Kumar is an Android Devices Enthusiast, Who Can Talk and Write About Anything If You Give a Hint About the respective devices. He is a Computer Science Graduate, Making His Career towards this Technology. He is always eager to try new Android devices — not only Software level but Hardware-level Also. Beyond this, He is a Good Swimmer, Guitarist.

Related Posts:

  • Ways to Block Phone Numbers in Android Mobiles
  • Troubleshoot Samsung Galaxy A50 SM-A505 Freeze Not Responding issues
  • How to Logout Completely from Facebook Messenger?
  • Sign in and Activate YouTube using youtube.com/activate
  • Fix Samsung Galaxy M21 SM-M215F Stuck on Boot Start screen logo
  • Download Samsung Galaxy Core Prime SM-G360 Lollipop Stock Firmware
Share This Post:

Tagged With: Samsung

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Join With Us

Recent Posts

  • Samsung Messaging App coming to Windows 10 via Microsoft Store
  • Download Samsung Galaxy M31s SM-M317F Android 11 One UI 3.0 Stock Firmware
  • Google Chat Web version now available free for Personal users
  • Backup and Web Playback are now available in Google Recorder Pixel Android App
  • Upcoming 2021 Google TV Box Remote may have Numbers, Settings, and an Exit button

Today Tip

Samsung Messaging App Installation in HP envy X360

Samsung Messaging App coming to Windows 10 via Microsoft Store

Samsung always tries to coverup the Android OS and Apps with its custom UI. They have to use Android … [Read More...] about Samsung Messaging App coming to Windows 10 via Microsoft Store

Advertisement

Copyright © 2021 AndroidInfotech.com, All Rights Reserved, Android is a trademark of Google Inc. All contents on this blog are copyright protected and should not be reproduced without permission.

  • Subscribe
  • Sitemap
  • About Us
  • Contact Us
  • Privacy Policy
  • Disclaimer
  • Our Image License
  • Hosted on Google Cloud
  • Ad Partner Ezoic