Samsung Galaxy A6 Plus comes with Oreo version. Samsung released the latest One UI Update for your device. If you need root on your pie device, you can flash old Oreo firmware using ODIN and root using this below method. After Flash, you can Install Pie firmware using the flashify app. If You again flash Pie, using ODIN, You will lose root access. Below Oreo, version method is a stable Method. Once we get the Pie Stable version, we will update soon.
Why should you Root Samsung Galaxy A6 Plus 2018?
You have a strong reason for rooting. Samsung Already released One UI 9.0 Pie version. The OS is already optimized. You have Enough 4 GB RAM to use daily apps without Lag. But beyond, you are addicted to some root apps or you are a frequent user of some Custom OS, you can proceed further. But if you just want to root, because everybody is doing, I advise don’t root If you didn’t have any experience.
How to Root Samsung Galaxy A6 Plus 2018 SM-A605F/ SM-A605FN / SM-A605G / SM-A605GN
Samsung Galaxy A6 Plus 2018 International variants come with a flexible bootloader. This means that the smartphone can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike.
TWRP recovery is a custom recovery file which must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy A6 Plus 2018. However, the tool required for rooting this device is the Magisk App.
With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your A6 Plus 2018 to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.
Things to check out for;
-
Check your device model number.
- Select TWRP Based on the mobile model number.
-
Make sure your device battery is charged above 50%
-
Backup your current files and data, just in case (save them on external storage).
Pre-Requirement Steps
-
Enable USB Debugging Mode and OEM Unlock in your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy A6 Plus 2018.
-
Download and install the Samsung USB driver to your computer system.
-
Also, download the ODIN software. Select above Oreo version in the ODIN list. Install ODIN in your PC.
- Download Magisk.Zip (Download Latest version) and RMM State Bypass, Copy it to Your Phone Memory. We Need to flash RMM State to avoid OEM Lock automatically in future after the Root process.
-
Download and save the TWRP File. Select Correct TWRP file from Below. This TWRPs can support Up to Oreo.
Flash TWRP using ODIN
- Connect your USB Cable with PC. Switch off your device. Then, enter into Download mode. To do this; press and hold down the Volume Down buttons and connect your micro USB Cable.
-
Press the Volume Up button to continue when you see the warning message.
-
Now, connect the A6 Plus 2018 mobile to the computer via USB cable.
-
Launch the Odin app on your computer. If the device is detected by this app (Odin), it will show you a message that reads – added!!!
However, if the device is not correctly connected to the PC, you won’t see this message. So, you have to check the USB cable if it is good and reconnect the device.
-
After connecting the Samsung device, click on the PDA/PA button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and tick the Auto Reboot.
-
Click on “Start”
-
Once the file is loaded into the device, reboot your device.
-
Kudos, you have just Installed the TWRP/CF-Auto-Root on your Samsung Galaxy A6 Plus 2018. If you installed TWRP, Don’t turn on your mobile. Immediately, move to Magisk Installation steps.
Install Magisk, RMM State in your Samsung Galaxy A6 Plus 2018 using TWRP
- Boot it Into recovery mode->Volume Up + Power Button.
- Now it Will Boot into TWRP Recovery Mode.
- Select Wipe->Advance Wipe->Select Cache Data.
- Return to Home of TWRP select Install.
- Select Magisk.Zip. After Installation again Navigate to Home select Install. Select RMM State Bypass.
- After the Installation Reboot Your Mobile.
- You can also install Magisk.apk in your Mobile Applications. RMM State is used to avoid OEM Lock after rooting.
What More?
You should not Boot into Normal OS Booting, after TWRP. After TWRP Flash, Immediately Boot into Recovery or Else you will get Warning message FRP Lock. If you accidentally urged and boot frequently, Don’t panic, flash official stock firmware to get back into stock OS.
Selva Kumar is a Technology Enthusiast, Who Can Talk and Write About Anything If You Give a Hint About the Technology. He is a Computer Science Graduate, Making His Career towards this Technology.
Can I root my SM-605FN with Android 9.0 using the above method? or for Android Pie there are other rooting files (different RMM bypasses and TWRPs)?
No. We try to update with your model Number. Don’t work with other Models; It may lead to brick your device.
I’m still waiting on the Android 9 Pie version. I have the Samsung Galaxy A6. SM-A600T1. Thank you guys.
SM-A600T already received Pie Update. Soon your model will get Update.