Root Samsung Galaxy Note 10/Plus Snapdragon SM-N9700/N9750 Pie 9.0 using TWRP and Magisk

When you bought Snapdragon variants in Samsung Galaxy devices, you can expect extraordinary performance, But when it is coming to developing methods like Rooting, you will be more restricted. That’s why Snapdragon processor devices get late rooting ways, or they will come with limited features. But, Chinese variants are different. Here I mentioned the root method for Samsung Galaxy Note 10 and the Plus Variant Snapdragon Pie 9.0 versions. Please refer to the model number (N9700 and N9750 only); This method won’t work with the US variants. In my opinion, you should have a strong reason for rooting. Compare with the Magisk based approach, this method is simple and gives you full freedom to use Custom ROMs. But Performance is your concern. You have a well-optimized device already. After the root, you will lose official updates from Samsung. So, If you are a regular user, and you know what you are doing, you can proceed. When anything goes wrong, no problem, you can restore your mobile by flashing the firmware using ODIN.
Samsung Galaxy Note 10 on the Brown Wooden Table

If you are a Developer or Regular Root apps user, The great news is we have TWRP. So you can try multiple Custom ROMs and can reach all Root levels. But, you can’t root like Old method. We need to unlock the bootloader. It is only one extra step. So, to reduce confusion, I split the Steps into small parts. The First one is the Unlock Bootloader. And the Second one is flashing TWRP and installing files using TWRP. The method is based on Official TWRP so that we can expect a high success rate.

Why should you Root Samsung Galaxy Note 10 and Note 10 Plus?

You should have a strong reason for rooting. Samsung Already released One UI 9.0 Pie and is already optimized. You have More than Enough 8/12 GB RAM and Powerful Qualcomm SDM855 Snapdragon 855 processor to use daily apps without Lag. You can use this device without lag for years until Samsung mess with some Bloatware. But beyond, this not go reasons, you are addicted to some root apps, or you are a frequent user of some Custom OS, you can proceed further. But if you want to root because everybody is doing, I advise you, don’t root If you didn’t have any experience. For regular users, It can become a Nightmare.

How to Install TWRP on and Root Samsung Galaxy Note 10/Plus Snapdragon SM-N9700/N9750 Pie 9.0 using Magisk

First of all, thanks to muso – XDA Senior developer for finding this way. Additional to this, we should thank XDA Developers- topjohnwu (For Magisk- this genius is a one who discovered and maintaining Magisk) and PiCkLeS for exploring the TWRP installing steps. Samsung Galaxy Note 10 Plus Snapdragon Chinese variants come with a flexible bootloader. This means that the smartphone can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike. Don’t try with Snapdragon US Variants like Verizon devices. They come with a heavily locked Bootloader.

But In the below method, we are going to Root this device by using TWRP, and then we are going to install Magisk and other files. Before this, In All Samsung devices, we Install TWRP first and Install Magisk Second hand. We are doing the same here. I Know sometimes we used Magisk only method. But, Now We got official working TWRP. You can install TWRP using the official App after root to get regular updates. TWRP recovery is a custom recovery file that must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy Note 10 Plus. However, the tool required for rooting this device is the TWRP and Magisk App.

With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your Note 10 Plus to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.

Things to check out for;

  • Check your device model number.

  • Don’t try with the US variants.
  • Install Latest Magisk Manager.
  • Make sure your device battery is charged above 50%

  • Backup your current files and data- Full Data Loss Process (save them on external storage).

  • You cannot use Samsung Pay, Secured folder, and some official apps from Samsung.
  • You can’t update your firmware, to get new firmware you have to follow the below steps with the latest firmware.
  • Read the full tutorial before the process.

Pre-Requirement Steps

Enabling developer option

  • Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy Note 10 Plus.

  • Download and install the Samsung USB driver to your computer system.

  • Also, download the ODIN software. Select the above Oreo version in the ODIN list. Install ODIN on your PC.

  • You need three files- TWRP, Kernel, and Encryption. Based on your model number, select the TWRP and Kernel. Magisk and DM-verity-Encrypt are the same for both model numbers.

Unlock Bootloader

Enabling developer option

  • Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy Note 10 Plus.

Samsung Galaxy Note 10 Recovery Mode

  • Switch off your device. Enter into Download Mode-> Volume Up+Volume Down and Connect your mobile with PC using USB Cable. When Download mode warning screen Appears, Press Volume Up button to unlock Bootloader.

Samsung Galaxy Bootloader Warning Screen

  • The above process will wipe your User Data. After Setup your device, Please recheck the OEM Unlock in the settings. Sometimes It Will Lock Again.

Flash TWRP using ODIN

Samsung Galaxy Note 10 Plus Download Mode

  • Switch off your Mobile. Enter into Download mode->Volume Down+ Volume Up Buttons and Connect Your Mobile To PC via USB Cable, After Samsung Logo Appear, Release all keys.

Samsung Galaxy Note 10 Plus Download Mode Warning Screen

  • After entering into Download Mode, it will say Warning, Press Volume Up button to continue.
  • Launch Odin Application.

ODIN Added Message

  • It Will Show the message added.
  • If you did not get this message Repeat the above steps.

ODIN software screenshot


  • After Getting Added Message Select, AP/PDA Button, then Browse for the Firmware file selects it. Un-Tick the Auto-Reboot.

Odin Auto Reboot

  • Press Start wait for the tasks to complete. After the process complete, Press Volume Down+ Power button to exit Download mode. When the screen goes off, Immediately Press Volume Up + Power buttons to boot into Recovery mode.

Samsung Galaxy Note 10 Recovery Mode Keys

  • After entering into TWRP recovery mode, Go to Wipe Data/Factory Reset and Select Yes to wipe data. It will erase your saved data in your device. Don’t Boot into OS, In the TWRP menu, Advanced->Reboot> Recovery.

Samsung Galaxy S10 multidisabler

Install Magisk, Kernel, and encryption in your Samsung Galaxy Note 10 Plus using TWRP

  • Insert Your Pendrive with OTG Cable. Plus variant doesn’t need Pendrive, because we saved the files in SD Card.

Samsung Galaxy J4 Plus TWRP

  • If you didn’t reboot to recovery using the menu, You could use physical keys. Boot it into recovery mode->Volume Up + Power Button.
  • Now it Will Boot into TWRP Recovery Mode.
  • Select Wipe->Advance Wipe->Select Cache Data.
  • Return to Home of TWRP select Install.

Samsung Galaxy A6 Plus 2018 Magisk no verity Installation

  • Select
  • Return to Home of TWRP select Install.
  • Select Same process on installation.
  • You should Install One by One. Don’t use the “Add more zips” feature in TWRP. After the Installation Reboot Your Mobile.
  • If you didn’t find Magisk in App Drawer, after the reboot, You could also install Magisk.apk in your Mobile Applications. Encryption disabler is used to avoid the Encryption issue after rooting. You can check your root status using Root Checker.

What More?

In my opinion, you don’t need rooting for your Samsung Galaxy Note 10 and Note 10 Plus. If you thought you could Improve Performance By root; With the Qualcomm SDM855 Snapdragon 855 Octa-Core processor and 8/12 GB RAM, your device can perform well. If you don’t know how much RAM you need, You will never use this much RAM. You should not Boot into Normal OS Booting, by pressing the power button, after the twrp flash. If you accidentally urged and boot into the regular OS, Don’t panic, after setup everything, flash TWRP again using ODIN. If you root your device, because of the battery drain issues, you can optimize your battery without root. When Bloatware apps are your problem, you can Disable Bloatware apps using adb commands.

Source, (2), (3)

Share This Post:

21 thoughts on “Root Samsung Galaxy Note 10/Plus Snapdragon SM-N9700/N9750 Pie 9.0 using TWRP and Magisk

  1. Hello,
    I have a question from TWRP recovery mode, Do I have to Wipe Data? And that means all data will be gone, including photos, apps, etc…?

    • Yes, Without deleting user data, your mobile may fall into Bootloop. It is necessary. But, When you Boot into TWRP in the first Boot, Take Complete Backup before installing Magisk and other files. You can restore them later.

        • After Pie 9.0 version, Google disabled the call recording feature for security purposes. You need Root to record calls in a full function. Or Wait for some time. Google is working on native call recording feature. After the release, Samsung will roll out in upcoming updates.

  2. There’s still no way for me to find ‘OEM unlocker’ on my Verizon Note 10+ running Snapdragon.

    Is there any word yet on how to access OEM without waiting for 7 days?

    • Verizon devices are too hard to root. This method is supporting only the Chinese variant. Don’t try with other US Carriers. It will brick your mobile. We already mentioned this in the Note. Why Do You need Rooting? If you say your purpose, I can suggest some alternatives.

  3. Hello, good afternoon, I have followed this entire tutorial, and it worked correctly. Still, the problem was that the memories, internal and external, are encrypted, or something is happening with the entire general storage system, and I do not have access to them to modify, there They are physically, and I can get into them. Still, I can’t get anything in or out of them, I ask you for a solution, please. Thank you.

      • Thank you very much for the quick response, and I think I have found the error, my problem was not doing the Data / Factory Reset step before I made the Kernel and DM verity files flash. If that step is not done, the device is left without access to internal memory, and the “KG State: Prenormal” “Only official released binaries are allowed to be flashed” is activated… So the case is solved, thanks. But I would like to know if it is necessary, or if it does not affect to flash the file “”, to prevent the “Prenormal KG / RMM State” and at what time or in what order should I do it?

        • If you didn’t get RMM state, yo don’t need to flash the file. But As a precaution, we advise our friends to flash the file. If you can access your mobile without any error, you don’t have to worry.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.