• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
Android Infotech

Android Infotech

Android Tips, News, Guide, Tutorials

  • News
  • Root
  • Firmware
  • Applications
  • Knowledge
  • Tutorial
  • I’m Bored
  • Deals
  • Donate
  • 🔎Search
Home » Firmware » Fix Samsung Galaxy M20 SM-M205F/G/M/N Stuck on Boot Start Screen logo

Fix Samsung Galaxy M20 SM-M205F/G/M/N Stuck on Boot Start Screen logo

by Selva Kumar A Leave a Comment

Even if you maintain your mobile correctly, sometimes we can’t escape from manufacturer issues in software. It can happen during an essential application update or monthly security patch updates. When it is an auto error that occurred during the OTA process, we can fix ourselves. One of the problems after updating your mobile is the boot logo stuck. Here we will guide you by resolving your Samsung Galaxy M20 Stuck on the Boot Start screen logo. We always start from the minimal fix method to firmware flash. The firmware flash should be your final choice. Most of the time, we can rectify your mobile without losing data. Most of the time 3GB RAM variant faces this kind of issue when handling heavy update boot.
Samsung Galaxy M20 Home screen on the couch

When you are facing freeze issues, You can try different methods other than the following ways. The next process is purely for the Boot logo stuck in the start screen.

Table of Contents

  • What is Stuck on the Boot logo in Samsung Galaxy M20?
  • How to Fix Samsung Galaxy M20 Stuck on Boot logo (SM-M205F, SM-M205FN, SM-M205G, SM-M205M, SM-M205N)?
  • 1. Long Press Power Button
  • 2.Boot into Safe Mode
  • 3. Reboot using recovery
      • 3.1 Stock Recovery method
      • 3.2 TWRP Recovery method
  • 4. Using ADB Commands to Reboot, your boot logo stuck Samsung Galaxy M20 Mobile
      • Steps
  • 5. Drain Battery Completely
  • 6. Wipe Cache Data Partition
      • 6.1 Stock Recovery method
      • 6.2 TWRP Recovery method
  • 7. Disable Recently installed apps using ADB
  • 8. Fix firmware using Samsung SmartSwitch
    • 8.1 Restore mobile Using Emergency Recovery
    • 8.2 When You have SmartSwitch Backup
  • 9. Flash Boot.img file using ODIN and Repair Boot logo stuck Samsung Galaxy M20
    • 9.1 Creating boot.tar file
    • 9.2 Flash boot.tar using ODIN
  • 10. Flash Complete Firmware using ODIN
  • Wrap Up

What is Stuck on the Boot logo in Samsung Galaxy M20?

OTA updates are, most of the time, flawless processes. But when the mobile begins to finish the first boot after the update, It is a nail-biting situation for most users. Because sometimes the boot can take a long time than usual. If the boot happens after a long time, it is excellent. But When the boot takes more than 20 minutes, and it is stuck on the Samsung Galaxy M20 name logo, It is not a good sign. You can wait for a few minutes. Even after your mobile is not booted into the regular screen, It means your mobile is stuck on the Samsung Boot logo. You don’t need to worry. We can start with simple methods to fix these issues. Always start with the simple process. Most of the time, the boot stuck fixed in simple ways.

Buy Samsung Galaxy S22 Ultra from $6.46/mo for 24 Months with Eligible Trade-In.
Samsung Galaxy S23 available for $0.00/mo with T-Mobile Credit and Trade-in Deal

Samsung Galaxy M20 stuck on boot logo

Boot logo stuck can happen for various reasons and different situations. When you restart the mobile after the monthly security patch updates or major upgrades like Pie, Android 10, It can happen. Due to Overwrite already existing codes in the OS, and the process doesn’t go as expected, We have to deal with this kind of problem. When you face this issue, Don’t rush for firmware flash, You will lose user data. The Firmware flash should be your last choice, and We can recover your mobile using different methods. The stuck can happen in two screens- The Samsung Logo and The Mobile details screen logo. For both screens, the following techniques will work.

How to Fix Samsung Galaxy M20 Stuck on Boot logo (SM-M205F, SM-M205FN, SM-M205G, SM-M205M, SM-M205N)?

When you give some time than usual, and your mobile won’t boot into System OS, then you can follow the below methods to fix your stuck Samsung Galaxy M20 on the Boot logo. Our motto is as much as we can retrieve your mobile without losing data. But when we can’t, we have to flash the full firmware to get your mobile back.

1. Long Press Power Button

Most of the time, all electronic devices will work after the power off and on. Even if it is a simple method, and you may wonder what technology can help here. It will work most of the time. Long press your power button for 10 seconds, It will trigger the power of your mobile, and your mobile will shut down in a few seconds.

2.Boot into Safe Mode

Sometimes third-party apps may trigger the new version, and it may cause the stuck in boot logo. Try to boot into Safe Mode by pressing Volume Down for 10-15 seconds. Your mobile will boot into Safe mode. Try to Un-Install the recently installed app before the OTA process. Also, check with the compatibility in Play Store. When you install the apps other than Play Store, Un-Install them and try to boot again.

Also Read-  Download Samsung Galaxy M30s SM-M3070/F/FN Pie 9.0 One UI Stock Firmware

Samsung Galaxy M20 Safe Mode

3. Reboot using recovery

This method will not affect your User data. It will only soft reset your mobile. You have to press Volume Up+ Volume Down+ Power Button on your mobile for 7-10 Seconds to boot into recovery mode. After that, it will boot you into the recovery mode, or it will directly boot into System OS. The response may vary depending on the mobile manufacturers. If you received a Recovery mode menu, use the Volume keys to navigate and the Power button to confirm the selection.

Samsung Galaxy M20 Recovery Mode

3.1 Stock Recovery method

Samsung Galaxy Stock Recovery Mode Boot

If you didn’t use Rooted mobiles, you have Stock Recovery, provided by your official mobile manufacturer. If you have stock recovery, you have the direct option as “Reboot System Now.” Navigate to this option and confirm it using the power key button.

3.2 TWRP Recovery method

When you use Rooted mobiles, you either use Stock Recovery or TWRP custom recovery. If you have Stock Recovery, you can use the above process. When you installed TWRP on your mobile, follow the steps below.

TWRP Recovery Normal Boot to OS

  • The Keycombinations will boot your mobile into TWRP Recovery mode.
  • On the Home screen, you can find the option as “Boot.” Select the item; you will receive further options as System, Power Off, Recovery, and Bootloader. Select “System.” Your mobile will boot into Normal OS.

4. Using ADB Commands to Reboot, your boot logo stuck Samsung Galaxy M20 Mobile

This process may work 50-60%. If you use Old Mid-range mobiles, the chances are less. But, When you have Flagship mobiles or New mobiles, it will work. The OS still can handle background commands. So, the ADB commands may work.

Steps

  • Download the Samsung USB driver and install it on your PC.
  • Also, download the ADB drivers. Install it on your PC.

ADB Drivers Installation

  • Connect your mobile with PC.

ADB command Open

  • Open a command prompt as Administrator and type the below command to check the ADB status.
  • adb devices

adb reboot command

  • It should display the connected devices. If you didn’t get the mobile, restart the command prompt and Disconnect and Connect your mobile. If you are detected, type the below commands.
  • adb reboot
  • The command will reboot your mobile.

5. Drain Battery Completely

When You can’t Power off or Restart your mobile, Let the battery drain completely. Because with the massive battery, it may take 1-3 days, depending on your mobile battery backup, to remain. When you didn’t have this much time, and you want to urge fix methods, you can proceed with other ways.

6. Wipe Cache Data Partition

When you perform, restart using recovery, and you can’t boot into OS again. In this situation, We have another choice of the fix by Wipe cache partition. It is also will not affect user data. It will wipe only cache data. You have to press Volume Up+ Power Button on your mobile for 7-10 Seconds. After that, it will boot you into the recovery mode, or it will directly boot into System OS. The response may vary depending on the mobile manufacturers. If you received a Recovery mode menu, use the Volume keys to navigate and the Power button to confirm the selection. Remember, you should wipe only the cache partition, Not the Wipe Data/Factory Reset.

6.1 Stock Recovery method

Samsung Galaxy Wipe Cache Partition

If you didn’t use Rooted mobiles, you have Stock Recovery, provided by your official mobile manufacturer.

  • If you have stock recovery, you have the direct option as “Wipe Cache partition.” Navigate to this option and confirm it using the power key button.

Confirm Wipe Cache Samsung Galaxy

  • It will ask you to confirm the process. Select “Yes.”
  • Most of the time, it will boot into OS after the wipe. When it returns to recovery, Select the Reboot system now.

6.2 TWRP Recovery method

When you use Rooted mobiles, you either use Stock Recovery or TWRP custom recovery. If you have Stock Recovery, you can use the above process. When you installed TWRP on your mobile, follow the steps below.

Wipe Data in TWRP

  • The Keycombinations will boot your mobile into TWRP Recovery mode.
  • On the Home screen, you can find the option as “Wipe.” Select the wipe option; you will receive further details. Select “Cache.” Don’t select the System. It will wipe your OS. After selecting other choices, swipe to erase the data. When the process completes, return to home and boot into OS.
Also Read-  Root Samsung Galaxy J5 2017 SM-J530F/FM/G/K/L Oreo 8.1 using TWRP

7. Disable Recently installed apps using ADB

If you use Stock Android phones, most of the time, you can disable/remove the bloatware apps. If you are in Custom Skin OS, the chances of disabling the Bloatware apps are less. But, We can Disable the Apps using ADB without root. The methods may vary depending on the manufacturer. You have to find the particular Bloatware apps and disable them. I will give the overall idea about ADB steps and commands. But, the list of packages may vary depending on the manufacturers.

  • Download the ADB drivers. Install it on your PC.

ADB Drivers Installation

  • Enable USB Debugging Mode and OEM Unlock; you’ll find these options at Settings >>> Developer options. If you didn’t see the developer options on your settings menu, then go to about >>> build number. Click on the “Build Number” row for about ten times regularly to activate “Developer Option” on your device.

Samsung Galaxy USB debugging Allow

  • Connect your mobile with PC and unlock your mobile (Screen Lock).

ADB command Open

  • Open a command prompt as Administrator and type the below command to check the ADB status.
  • adb devices
  • The above command will display some code for device detection. If you didn’t receive any response, Check with the USB Cable. If you get a response, move to the below commands.

Samsung Galaxy Internet Browser Disable Using ADB

  • You can disable the apps based on their adb package name. You can find these package names using the below command.
  • adb shell pm list packages
  • Based on the title, you can exclude unwanted apps. After that, use the am force-stop, and pm disables commands with the Application package name.
  • You can enter the commands one by one, Or All commands and Hit Enter. You can get the application package name in Play Store URL. It will start with com.instagram.android like that.
  • am force-stop package name(e.g: com.sprint.w.installer)

      pm disable-user package name

  • Restart your mobile. When you again stuck on boot logon on your Samsung Galaxy M20 mobile, move to different methods.

8. Fix firmware using Samsung SmartSwitch

Compare with other manufacturers, Samsung SmartSwitch is an excellent PC suite that can help you in many situations. When you already take backup using SmartSwitch, and your Samsung Galaxy M20 mobile stuck at the boot logo. We can Flash the firmware using SmartSwitch then we can back up all the data using the same software. So, The chance for data loss is less. When you didn’t have a backup, this method will not help you. You can move differently.

Samsung SmartSwitch Connect Mobile screen

  • Download and Install Samsung SmartSwitch Windows/Mac version.

Device Driver Installation Samsung SmartSwitch

  • Install Device Driver from More option in the connect screen.

8.1 Restore mobile Using Emergency Recovery

Samsung Galaxy M20 Download Mode Type C

  • Put your Samsung Galaxy M20 mobile to download mode by pressing Volume Down+ Power Button. Connect your mobile with PC using USB Cable.

Emergency Software Recovery Samsung

  • After connecting the mobile with PC, In More options, Select “Emergency Software Recovery.” When you get the mobile in the list, proceed with the steps. Your stuck boot logo will repair in this process. When you didn’t get the list mobile, and you have a backup of your mobile using SmartSwitch, then move to the below method.

8.2 When You have SmartSwitch Backup

The backup method will help you when you have backup data using SmartSwitch. Remember, when you didn’t have a backup, You will lose your data.

  • Put your Samsung Galaxy M20 mobile to download mode by pressing Volume Down+ Volume Up+ Power Button. Connect your mobile with PC using USB Cable.

Device Installation Samsung SmartSwitch

  • After connecting the mobile with PC, In More options, Select “Emergency Software Recovery.” Then in another tab, choose “Device Installation.” Type your mobile model number and S/N. The name and value of S/N can be found on mobile phone backside stickers with IMEI or in the retail box.

S/N Number in Mobile

  • It will automatically detect the latest software version and proceed with the update process.
  • After the successful update, restart your mobile and set up everything like new with the same Google Account.

Restore Data Samsung SmartSwitch

  • Now relaunch SmartSwitch and Choose Restore. Allow necessary permissions on your mobile. Select your backup data and restore it in your Samsung Galaxy M20 mobile.

9. Flash Boot.img file using ODIN and Repair Boot logo stuck Samsung Galaxy M20

The main problem of stuck in the boot logo is with the boot image file. When we flash the particular boot image file, then we can restore your mobile without losing data. But you should know what version of the software is already on the mobile. You can always go with the latest boot image file.

  • Download and install the Samsung USB driver to your computer system.

  • Also, download the ODIN software. Select the above Oreo version in the ODIN list. Install ODIN on your PC.

  • Download Samsung Galaxy M20 firmware and save it on your PC. Your Current OS version and Downloaded Version AP and CSC should be the Same.

9.1 Creating boot.tar file

Samsung AP Extracted files

  • Download 7Zip-ZS, LZ4, and Install both on your PC. Extract the files in downloaded firmware using 7Zip-ZS. You will get four files. Click on the AP File and Extract again. You will get some data along with the boot.img.lz4.
Also Read-  Fix Samsung Galaxy Tab S7 FE LTE/5G SM-T730/5/6/7/8 Stuck on Boot Start screen logo

Convert lz4 file to img

  • Copy the boot.img.lz4 to LZ4 Installed folder. Convert the lz4 file to .img file by dragging the .img file to the lz4 application file. You have to drag the file to that application. The script will automatically convert the file to .img format. Again convert this .img file into .tar using 7ZIP. Copy the .tar file to PC.

Convert magisk patched tar file

9.2 Flash boot.tar using ODIN

  • Connect your USB cable with PC. Switch off your device. Then, enter into Download mode. To do this, press and hold Volume Down+ Power Buttons and Connect Your Mobile To PC via USB Cable; after Samsung Logo Appear, Release all keys.

Samsung Galaxy M20 Download Mode Type C

  • Press the Volume Up button to continue when you see the warning message.

  • Now, connect the Samsung Galaxy M20 mobile to the computer via USB cable.

  • Launch the Odin app on your computer. If Odin identifies the device, it will show you a message that reads – added!!!

ODIN Added Message

  • However, if the device is not connected with the PC correctly, you won’t see this message. So, you have to check the USB cable if it is reasonable and reconnect the device.
  • After connecting the Samsung device, click on the PDA/PA/AP button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and Un-tick the Auto-Reboot.

Odin Auto Reboot

  • Click on “Start”

  • Once the file is boot into the device, reboot your device.

10. Flash Complete Firmware using ODIN

In this method, we are going full flash firmware in your boot logo stuck Samsung Galaxy M20 mobile. It is a Data loss process. When you didn’t have any choice and none of the above methods didn’t work for you, then you can use this method. Refer- Flash Samsung Galaxy M20 Android 10 Firmware using ODIN.

Wrap Up

Even if the software updates process looks like a simple way, Mostly, 1-5% of people always face issues when they try to make OTA updates. That’s why we suggest you should always make a backup before making an update on your mobile. Always use cloud photo backup service like Google Photos. Compare with other mobile manufacturers, with the help of Samsung available tools, we can fix your Samsung Galaxy M20 stuck on the boot logo.

If you face freeze and unresponsive issues on your mobile, You should try different methods than the above mentioned. It is always a wise idea to give some time for the first boot after the update. Based on your available storage and apps size, the first boot may take a long time. When you are confident that the mobile stuck and you already gave enough time for initialization, then you can follow the above steps to fix your mobile. When you try different methods than above and that techniques help you, Comment below. We try to add if those methods work for everyone.

Source, (2), (3)

Selva Kumar A

Selva Kumar is an Android Devices Enthusiast, Who Can Talk and Write About Anything If You Give a Hint About the respective devices. He is a Computer Science Graduate and Certified Android Developer, Making His Career towards this Technology. He is always eager to try new Android devices — not only Software level but Hardware-level Also. Beyond this, He is a Good Swimmer, Guitarist.

Related Posts:

  • Fix Samsung Galaxy A03s SM-A037F/G/M/U/U1/W Stuck on Boot Start screen…
  • Troubleshoot Samsung Galaxy M20 SM-M205 Wi-Fi Not Working
  • Fix Unfortunately Google Play Services Stopped Working in Android…
  • Samsung Galaxy M20 SM-M205F/G/M/N Modes, Reset and SAR Value
  • Fix Xiaomi Civi 1S Stuck on Boot Start screen logo
  • Fix Xiaomi Poco F4 Stuck on Boot Start screen logo
Share This Post:

Filed Under: Firmware Tagged With: Boot, Samsung

Primary Sidebar

Join With Us

Deal of the Day

Samsung Galaxy S22 Ultra For $6.95/mo at Samsung Online Store.

Recent Posts

Google Pixel 8 Video Editing

Video Unblur coming to Google Pixel 8

YouTube Shorts Thumbnail Edit Video

How to Change YouTube Shorts Thumbnails?

T-Mobile and Mint Mobile Merger Ryan Reynolds and CEO

No Change in the $15/mo Mint Mobile Plan after T-Mobile Acquire

POCO X5 5G Unlocked Home Screen

POCO X5 5G launched for $230 With 120Hz AMOLED, Snapdragon 695 and 48MP camera

iQOO Z7 Series Back Side

iQOO Z7 Series with 120W Support Launching on March 20, 2023

Advertisement

Footer

Copyright © 2023 AndroidInfotech.com, All Rights Reserved, Android is a trademark of Google Inc. All contents on this blog are copyright protected and should not be reproduced without permission.

  • Subscribe
  • Sitemap
  • About Us
  • Contact Us
  • Privacy Policy
  • Disclaimer
  • Our Image License
  • Hosted on Google Cloud
  • Ad Partner Ezoic
  • Corporate Office