Moto E3 is released in 2016 with Budget price in mind with limited Specs. Moto E3 power released after three months with slightly upgrades specs. Both mobiles have limited Specs when we observe in the latest Android World. But, It still can be used for regular works. You can also use them as your secondary device. 1 GB RAM variant may suffer from Old OS. So, After Root, you should try to flash Lightweight Custom ROMs. Even if you are a regular user, I advise you to go for the root process. Moto OS is not that much-customized OS. It is near the Stock Android. But, Old OS can’t perform like the latest OS in features like RAM Management, Power Saving. If you are a Developer or regular root apps user, follow the below guide to achieve root on your mobile.
Why should you Root Moto E3 and E3 Power?
We thank XDA Developers- topjohnwu, HostZero, and dr.faramroze(Who successfully tested this method) Without their hard work, We can’t make this method. Coming to root, Your mobile has only 1-2 GB of RAM. It is not enough for Normal usage with Old OS. Also, Moto stopped maintaining Security patch updates on 60-90 days Interval. So we can’t expect Many optimizations. It has a Mediatek MT6735P processor.
Due to Poor RAM Management in Old device, you will feel laggy. If we optimize correctly with correct Custom OS after rooting, we can see some Improvements. So, after rooting, I can expect a Lag-free experience? Probably. Also, if we hibernate and eliminate a lot of unwanted apps and optimize some apps, your device is hardware limited. But, within these limits, we can enhance the performance by 20-30% compared with your old usage. If you use Lite weight Custom ROMs, you can expect a 40-80% improvement in performance based on what custom OS you are choosing.
How to Root Moto E3 /E3 Power Lollipop, Marshmallow 6.0 (International Variants)
Moto E3 International Variants comes with a flexible bootloader other than some carrier locked devices. This means that different smartphone variants can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike.
TWRP recovery is a custom recovery file that must be installed on your devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Moto E3. However, the tool required for rooting this device is the Magisk App.
With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your Moto E3 to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.
Things to check out for;
Make sure your device battery is charged above 50%
Backup your current files and data, full data loss process (save them on external storage).
Pre-Requirement Steps
Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode, OEM Unlock. There is no complicated process in Moto E3.
Download and install the Moto USB driver to your computer system.
Also, download the ADB drivers. Install it on your PC.
- Download Magisk.Zip (Latest Version) and Copy it to Your Phone SD Card.
- no-verity-opt-encrypt Download (Latest Version) and Copy it to Your Phone External Storage. This file helps you to maintain the Bootloader unlock in your device.
Download, extract, and save the TWRP File in your PC Where you Installed ADB files and rename it to recovery.img.
- twrp-3.3.1-0-taido.img (Moto E3)
Unlock Bootloader using ADB and Fastboot
- Switch off your device. Then, enter into Fastboot mode. To do this- Press and hold down the Volume Down + Power buttons at the same time for some time.
Press the Volume Up button to continue when you see the warning message.
Now, connect the Moto E3 mobile to the computer via USB cable.
Launch the fastboot on your computer. Open a Command prompt on your PC and type below command.
- fastboot devices
- It should display the connected devices. If you didn’t get the device, restart the command prompt and Disconnect and Connect your Moto E3. If you are detected, type below commands.
- fastboot oem get_unlock_data
- Hit enter, you will get some unlock data. Copy those codes and remove <bootloader> Prefix from those lines and copy them into one single line.
- Go to Official Moto Unlock Page. Log in with your moto account and in the Box, Paste those codes and Check the unlock Bootloader Status. If you get, Yes you can unlock, You can request unlock Key from Moto.
After the process completes, you will get 20 Digit to unlock the key in your email. Now type the following command to unlock bootloader on your device.
- fastboot oem unlock UNIQUE CODE
You should type this code two times and Hit enter to unlock your device successfully. After the successful unlock, your device will automatically reboot to the standard OS.
- Check again enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode, OEM Unlock. Sometimes they disabled themselves after the boot.
Flash TWRP
- Switch off your device. Then, enter into Fastboot mode. To do this, press and hold down the Volume Down+ Power buttons after Android Logo Appears Still press the Power button and press Volume Up Button.
Now, connect the Moto E3 mobile to the computer via USB cable.
Launch the fastboot on your computer. Open a Command prompt on your PC and type below command.
- fastboot devices
- It should display the connected devices. If you didn’t get the device, restart the command prompt and Disconnect, and Connect your mobile. If you are detected, type below commands one by one and Hit Enter.
- fastboot flash recovery recovery.img
- After successfully executed above command, type below command, and hit enter.
- fastboot reboot recovery
- After the process complete, It will boot into the temporary TWRP. Don’t Boot into standard OS until we flash magisk.
Install Magisk, and no verity in your Moto E3 using TWRP
- Select Wipe->Advance Wipe->Select Cache Data.
- Return to Home of TWRP select Install.
- Select no-verity-opt.Zip.
- Again Return to Home of TWRP select Install.
- Select Magisk.Zip.
- After the Installation Reboot Your Mobile.
- You can also install Magisk Manager in your Mobile Applications If you can’t find in the App Drawer. Install Root Checker to check your mobile root status.
What More?
In my opinion, you should root your mobile. If you are a regular user, read the guide a few times, you can understand all steps easily. You could Improve Performance By root; With the Mediatek MT6735P processor and 1/2 GB RAM, your device can perform well. If you don’t know how much RAM you need, You will never use this much RAM. You should not Boot into Normal OS Booting after TWRP Flash. If you boot, you will lose TWRP. You have to repeat the steps from “Flash TWRP.” Don’t Install any apps other than trusted sites on rooted devices. Third-party site apps can contain some background codes. So, Check twice before installing those apps. When you accidentally bricked your mobile, flash Moto E3 Stock Firmware to repair or unbrick. You can flash custom ROM to experience the pie 9.0 version. If you face any problem, comment below.
Selva Kumar is an Android Devices Enthusiast, Who Can Talk and Write About Anything If You Give a Hint About the respective devices. He is a Computer Science Graduate and Certified Android Developer, Making His Career towards this Technology. He is always eager to try new Android devices — not only Software level but Hardware-level Also. Beyond this, He is a Good Swimmer, Guitarist.
Leave a Reply