Root Samsung Galaxy M10 SM-M105F/G/M/Y Pie 9.0 using TWRP and Magisk

Samsung finally realized how it is essential to maintain software updates in their mobiles. After the One UI update, they added a lot of features and marinating regular patch updates. They also added some security measures to protect the device. So, We can’t use olf TWRP only method to root our mobile. We have to modify our firmware. Samsung Galaxy M10 received One UI Pie 9.0 upgrade. If you are in the Oreo version and want to move to Pie, you should flash the firmware using the Flashify app. Regular users won’t need root to enhance performance. If you feel Oreo is slightly slow, Upgrade to this One UI, you will feel good. There are some downsides to the root. This method is not like a regular method. You should need some experience in the firmware flash and rooting ways.
Samsung Galaxy M10 with Art Paint Background

After Rooting, you will not receive official updates from Samsung. I try my best to simplify this guide. But, I can’t skip the Important steps. If you are a Developer or regular root apps user, you can follow the below guide to achieve root on our mobile. Never Flash TWRP directly on your mobile. It will soft-brick your device. If your purpose is to disable bloatware apps, you can do this without rooting. I added the link to this guide at the end of this article.

Why should you Root Samsung Galaxy M10?

You should have a strong reason for rooting. Samsung Already released One UI 9.0 Pie and is already optimized. You have More than Enough 3 GB RAM to use daily apps without Lag for years. Yes, I Know, 3 GB RAM is not enough in this modern Android world. But, Trust me, One UI is far better than other Custom Skin OS. You can use this device without lag for years until Samsung mess with some Bloatware. But beyond, this not go reasons, you are addicted to some root apps, or you are a frequent user of some Custom OS, you can proceed further. But if you want to root because everybody is doing, I advise you, don’t root If you didn’t have any experience. For regular users, It can become a Nightmare.

How to Root Samsung Galaxy M10 Pie 9.0 (SM-M105F, SM-M105G, SM-M105M, SM-M105Y)

First of all, thanks to surbiks – XDA developer for TWRP support and topjohnwu – this genius is a one who discovered and maintaining Magisk. Samsung Galaxy M10 International variants come with a flexible bootloader. This means that the smartphone can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike. Don’t try with Snapdragon US Variants like Verizon devices. They come with a locked Bootloader.

But In the below method, we are going to Root this device by using Magisk and TWRP. You can install Official TWRP using the official App when it is released. TWRP recovery is a custom recovery file that must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy M10. However, the tool required for rooting this device is the Magisk App.

With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your M10 to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.

Things to check out for;

  • Check your device model number.

  • Install Latest Magisk Manager.
  • Make sure your device battery is charged above 50%

  • Backup your current files and data- Full Data Loss Process (save them on external storage).

  • You cannot use Samsung Pay, Secured folder, and some official apps from Samsung.
  • You can’t update your firmware, to get new firmware you have to follow the below steps with the latest firmware.
  • Read the full tutorial before the process.

Pre-Requirement Steps

Unlock Bootloader

Enabling developer option

  • Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy M10.

Samsung M10 Download Mode

  • Switch off your device. Enter into Download Mode-> Volume Down+ Volume Up+ Power and Connect your mobile with PC using USB Cable. When Download mode warning screen Appears, Press Volume Up button to unlock Bootloader.

Samsung Galaxy Bootloader Warning Screen

  • The above process will wipe your User Data. After Setup your device, Please recheck the OEM Unlock in the settings. Sometimes It Will Lock Again.

Preparing Patched Boot Image file

  • Download and install the Samsung USB driver to your computer system.

  • Also, download the ODIN software. Select the above Oreo version in the ODIN list. Install ODIN on your PC.

  • Download Samsung Galaxy M10 Firmware and save it on your PC. Your Current OS version and Downloaded Version AP and CSC should be the Same.
  • Download forced_encryption_disabler, RMM State Bypass, Copy it to Your SD Card Memory. We Need to flash RMM State to avoid OEM Lock automatically in the future after the Root process, and no-verity-opt-encrypt, Copy it to Your Phone Memory. We Need to flash encryption disabler to avoid Boot Warnings in the future after the Root process. Copy all these files to the external SD Card.
  • You should download the TWRP file from below. If you need Custom Recovery to follow this step or you can skip. Copy this file to PC for flash using ODIN.
  • You can use Phone Info to know your firmware version.
  • Download 7Zip-ZS Install on your PC. Extract the files in downloaded firmware using 7Zip-ZS. You will get four data. Copy “AP.tar.md5” file to your mobile.
  • Download Magisk Manager (Download Latest version) or Magisk canary and Install it on your mobile. Open Installed Magisk and Select Install in Magisk; it will ask For zip file and Patch Boot Image File. Select the Boot Image file.

Magisk Boot Image File

  • Navigate to your copied Boot Image File and patch the file.

Magisk Firmware Patch Process

  • Wait for the process to complete, In the end, you will get magisk patched .tar file. The .tar file will be in the same folder where you have the Stock firmware file.
  • Copy magisk_patched.tar file to your PC.

Step 1: Flash Patched Boot Image using ODIN

  • Switch off your Mobile. Enter into Download mode->Volume Down+ Volume Up Buttons and Connect Your Mobile To PC via USB Cable, After Samsung Logo Appear, Release all keys.

Samsung Galaxy M10 Download Mode Warning Screen

  • After entering into Download Mode, it will say Warning, Press Volume Up button to continue.
  • Launch Odin Application.

ODIN Added Message

  • It Will Show the message added.
  • If you did not get this message Repeat the above steps.

ODIN software screenshot

  • After Getting Added Message Select, AP/PDA Button, then Browse for the magisk patched file selects it. All other three files should be Unpatched and Extracted from the firmware. So, Now you got four files in the ODIN. Un-Tick the Auto-Reboot.

Odin Auto Reboot

  • Press Start wait for the tasks to complete. After the process complete, Press Volume Down+ Power button to exit Download mode. When the screen goes off, Immediately Press Volume Up+ Volume Down + Power buttons to boot into Recovery mode.

Samsung Galaxy M10 Recovery Mode

  • After entering into Stock recovery mode, Go to Wipe Data/Factory Reset and Select Yes to wipe data. It will erase your saved data in your device. Don’t Boot into OS, Read below Boot stages before booting.

Samsung Galaxy M10 Recovery Mode Warning Screen

Boot into Rooted OS

  • Press and Hold Volume Up + Power buttons, release all the keys once the Bootloader warning appears. You have to set up your device like a new device. You can select the root status using the Root Checker.
  • Stock Recovery Boot – Press and Hold Volume Up + Power buttons, release keys while you hold the Volume Up key.
  • You will see Magisk Manager in your App drawer. If you can’t find the app, you can install Magisk Manager on your mobile.

Step 2: Flash TWRP using ODIN

  • Connect your USB cable with PC. Switch off your device. Then, enter into Download mode. To do this, press and hold down the Volume Down + Volume Up+ Power button and connect your micro USB Cable.
  • Press the Volume Up button to continue when you see the warning message.

  • Now, connect the Samsung Galaxy M10 mobile to the computer via USB cable.

  • Launch the Odin app on your computer. If the device is detected by this app (Odin), it will show you a message that reads – added!!!

ODIN Added Message

  • However, if the device is not correctly connected to the PC, you won’t see this message. So, you have to check the USB cable if it is reasonable and reconnect the device.
  • After connecting the Samsung device, click on the PDA/PA button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and Un-tick the Auto-Reboot.

Odin Auto Reboot

  • Click on “Start”

  • Once the file is loaded into the device, reboot your device.

  • Kudos, you have just Installed the TWRP on your Samsung Galaxy M10. If you installed TWRP, Don’t turn on your mobile. Immediately, move to Magisk Installation steps. Press Volume Down+ Power Button to exit Download Mode. Quickly press Volume Up+ Power Button.

Install Magisk, no-verity-opt-encrypt, forced_encryption_disabler, and RMM State By-Pass in your Samsung Galaxy M10 using TWRP

Samsung Galaxy J4 Plus TWRP

  • Boot it into recovery mode->Volume Up + Power Button.
  • Now it Will Boot into TWRP Recovery Mode.
  • Select Wipe->Advance Wipe->Select Cache Data.
  • Return to Home of TWRP select Install.

Samsung Galaxy A6 Plus 2018 Magisk no verity Installation

  • Select forced_encryption_disabler.zip.
  • Return to Home of TWRP select Install.
  • Select RMM State By-Pass.zip. Same process on no-verity-opt-encrypt and Magisk installation.
  • You should Install One by One. Don’t use add more zips feature in TWRP. After the Installation Reboot Your Mobile.
  • You can also install Magisk.apk in your Mobile Applications. no-verity-opt-encrypt is used to avoid the Encryption issue after rooting. You can check your root status using Root Checker.
  • If you didn’t find Magisk in App Drawer, you should repeat the process from the OEM fix installation.

What More?

In my opinion, you don’t need rooting for your Samsung Galaxy M10. If you thought you could Improve Performance By root; With the Exynos 7870 Octa-Core processor and 3 GB RAM, your device can perform well. If you don’t know how much RAM you need, You will never use this much RAM. You should not Boot into Normal OS Booting, by pressing the power button, after firmware flash. It will boot you to a Non-Rooted environment. If you accidentally urged and boot frequently, Don’t panic, after setup everything, switch off your device and boot into Rooted OS using above mentioned keys. If you root your device, because of the battery drain issues, you can optimize your battery without root. When Bloatware apps are your problem, you can Disable Bloatware apps using adb commands.

Source, (2)

Share This Post:

10 thoughts on “Root Samsung Galaxy M10 SM-M105F/G/M/Y Pie 9.0 using TWRP and Magisk

  1. I am Facing A Problem Kindly Guide Me
    Samsung Galaxy M10 Smm105f U2
    I followed all the steps.
    Now I Want To Boot In System But After Booting In System Process Device Asking Me For A Password
    “Ur device Is encrypted For Security Plz Type your Password ”
    Even I Haven’t Locked Phone With Any Kind Of Privacy
    And I Have Also Flashed A New Firmware But Problem is same it’s Not Booting in System.

  2. I want to root because 16GB of space isn’t too much for me, and I bought an SD of 32 GB but can’t store my apps there either use it as the main space. Is it a good reason, right?

    • SD card storage is slow compare with mobile internal storage. But, When you can’t handle only 16 GB, consider buying Class 10 SD cards.

  3. I tried on my SM-105M, but it failed:
    Enter CS for MD5.
    Check MD5. Do not unplug the cable.
    Please wait..
    I can’t open the specified file. (Line: 2006)
    All threads completed. (succeed 0 / failed 1)
    Removed!!
    Added!!

      • I’m using the last firmware: pie (9), Baseband version M105MUBS4BTD1, Build number PPR1.180610.011.M105MUBS4BTD2.
        What version I should install can you send me the link?

          • I’m using the M105MUBS4BTD2 as you can see on the last message on the build number, and I flashed the latest firmware from sam mobile, the M105MUBS4BTD2, and now the flash on Odin is getting stuck:
            Added!!
            Odin engine v(ID:3.1401).
            Total Binary size: 22 M
            twrp-3.3.0-0-m105-pie.img

            Any clue how to fix it?

          • Did you flash the patched firmware first and check the root access?
            You can’t directly flash the TWRP like old Samsung models.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.