The days where you need to Root your mobile to get little power enhancement are over. The new mobiles are always coming with powerful specs that you don’t need root to boost up your mobile performance. But the Root process is not still about the performance. Most people root their mobile to use some apps that require Super User permissions, and they want to take full control of their mobile. Below we are going to guide you on How you can Root your Samsung Galaxy Note 10 and Note 10 Plus Snapdragon versions in Android 10 version using Magisk. Remember, the method works only with the mentioned model numbers. USA variants come with a locked bootloader. It is hard to process to unlock the carrier lock mobiles.
If you are a Developer or Regular Root apps user, The great news is we have TWRP. So you can try multiple Custom ROMs and can reach all Root levels. But, you can’t root like Old method. We need to unlock the bootloader. It is only one extra step. So, to reduce confusion, I split the Steps into small parts. The First one is the Unlock Bootloader. And the Second one is flashing TWRP and installing files using TWRP. The method is based on Official TWRP so that we can expect a high success rate.
Table of Contents
Should you Root Samsung Galaxy Note 10 and Note 10 Plus in Android 10?
You should have a strong reason for rooting. Samsung Already released One UI 2.0 Android 10 and is already optimized. You have More than Enough 8/12 GB RAM and Powerful Qualcomm SDM855 Snapdragon 855 processor to use daily apps without lag. You can use this device without delay for years until Samsung mess with some Bloatware. But beyond, this not go reasons, you are addicted to some root apps, or you are a frequent user of some Custom OS, you can proceed further. But if you want to root because everybody is doing, I advise you, don’t root If you didn’t have any experience. For regular users, It can become a Nightmare.
How to Install TWRP on and Root Samsung Galaxy Note 10/Plus Snapdragon SM-N9700/N9750 Android 10 using Magisk
First of all, thanks to muso – XDA Senior developer for finding this way. Additional to this, we should thank XDA Developers- topjohnwu (For Magisk- this genius is a one who discovered and maintaining Magisk) and PiCkLeS for exploring the TWRP installing steps. Samsung Galaxy Note 10 Plus Snapdragon Chinese variants come with a flexible bootloader. It means that the smartphone can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike. Don’t try with Snapdragon US Variants like Verizon devices. They come with a heavily locked Bootloader.
But In the below method, we are going to Root this device by using TWRP, and then we are going to install Magisk and other files. Before this, In All Samsung devices, we Install TWRP first and Install Magisk Second hand. We are doing the same here. I Know sometimes we used Magisk only method. But, Now We got official working TWRP. You can install TWRP using the official App after root to get regular updates. TWRP recovery is a custom recovery file that must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy Note 10 Plus. However, the tool required for rooting this device is the TWRP and Magisk App.
With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your Note 10 Plus to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.
Things to check out for;
Check your device model number.
- Don’t try with the US variants.
- Install Latest Magisk Manager.
Make sure your device battery is charged above 50%
You should Backup your current files and data- Full Data Loss Process (save them on external storage).
- You cannot use Samsung Pay, Secured folder, and some official apps from Samsung.
- We can’t update your firmware, to get new firmware you have to follow the below steps with the latest firmware.
- Read the full tutorial before the process.
Pre-Requirement Steps
Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy Note 10 Plus.
Download and install the Samsung USB driver to your computer system.
Also, download the ODIN software. Select the above Oreo version in the ODIN list. Install ODIN on your PC.
- You need three files- TWRP, Kernel, and Encryption. Based on your model number, select the TWRP and Kernel. Magisk and DM-verity-Encrypt are the same for both model numbers.
- Download TWRP_N9700_3.4.0.tar/ TWRP_N9750_3.4.0.tar and copy it on your PC.
- Download bm-kernel-n97X0-vr90.zip, Magisk.Zip (Latest Version), and Disable-Dm-Verity-ForceEncrypt.zip copy it on your PenDrive With Type-C OTG Cable. You can refer to the uses of OTG. (Plus variant have SD card, so, you can prefer external SD Card).
Unlock Bootloader
Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy Note 10 Plus.
- Switch off your device. Enter into Download Mode-> Volume Up+Volume Down and Connect your mobile with PC using USB Cable. When Download mode warning screen Appears, Press Volume Up button to unlock the bootloader.
- The above process will wipe your User Data. After setup your device, Please recheck the OEM Unlock in the settings. Sometimes It Will Lock Again.
Flash TWRP using ODIN
- Switch off your Mobile. Enter into Download mode->Volume Down+ Volume Up Buttons and Connect Your Mobile To PC via USB Cable, After Samsung Logo Appear, Release all keys.
- After entering into Download Mode, it will say Warning, Press Volume Up button to continue.
- Launch Odin Application.
- It Will Show the message added.
- If you did not get this message, Repeat the above steps.
- After Getting Added Message Select, AP/PDA Button, then Browse for the Firmware file selects it. Un-Tick the Auto-Reboot.
- Press Start wait for the tasks to complete. After the process complete, Press Volume Down+ Power button to exit Download mode. When the screen goes off, Immediately Press Volume Up + Power buttons to boot into Recovery mode.
- After entering into TWRP recovery mode, Go to Wipe Data/Factory Reset and Select Yes to wipe data. It will erase your saved data in your device. Don’t Boot into OS, In the TWRP menu, Advanced->Reboot> Recovery.
Install Magisk, Kernel, and encryption in your Samsung Galaxy Note 10 Plus using TWRP
- Insert Your Pendrive with OTG Cable. Plus variant doesn’t need Pendrive, because we saved the files in SD Card.
- If you didn’t reboot to recovery using the menu, You could use physical keys. Boot it into recovery mode->Volume Up + Power Button.
- Now it Will Boot into TWRP Recovery Mode.
- Select Wipe->Advance Wipe->Select Cache Data.
- Return to Home of TWRP select Install.
- Select Kernel.zip.
- Return to Home of TWRP select Install.
- Select encrypt.zip. Same process on Magisk.zip installation.
- You should Install One by One. Don’t use the “Add more zips” feature in TWRP. After the Installation Reboot Your Mobile.
- If you didn’t find Magisk in App Drawer, after the reboot, You could also install Magisk.apk in your Mobile Applications. Encryption disabler is used to avoid the Encryption issue after rooting. You can check your root status using Root Checker.
What More?
In my opinion, you don’t need rooting for your Samsung Galaxy Note 10 and Note 10 Plus. If you thought you could Improve Performance By root; With the Qualcomm SDM855 Snapdragon 855 Octa-Core processor and 8/12 GB RAM, your device can perform well. If you don’t know how much RAM you need, You will never use this much RAM. You should not Boot into Normal OS Booting, by pressing the power button, after the twrp flash. If you accidentally urged and boot into the regular OS, Don’t panic, after setup everything, flash TWRP again using ODIN. If you root your device, because of the battery drain issues, you can optimize your battery without root. When Bloatware apps are your problem, you can Disable Bloatware apps using adb commands.
Selva Kumar is an Android Devices Enthusiast, Who Can Talk and Write About Anything If You Give a Hint About the respective devices. He is a Computer Science Graduate and Certified Android Developer, Making His Career towards this Technology. He is always eager to try new Android devices — not only Software level but Hardware-level Also. Beyond this, He is a Good Swimmer, Guitarist.
Is there any root method for Note 10+ SM-N9750 Snapdragon for the Android 11 version, please?
Compare with International versions; Snapdragon versions need additional steps. We will post it once we get the verified steps.
I have my note 10+ rooted with magisk; however, I want to install TWRP. Do I do all of the above steps, including kernel and reboot as normal, and things should be ok? will I lose all apps, user data, etc.? Thanks.
Clean Installation is advisable. But In the first boot, Take complete backup and do the process. After restoring the data.
do you know any stable custom roms that work on n9750?
You can try CrDroid ROM.
How can you encrypt this device and have also root? What are the steps?
Flash no-verity and change the encryption in TWRP settings. But some of the Root apps may not work correctly.