Root Xiaomi Mi Note 10 Pie 9.0 using TWRP and Install Magisk

Xiaomi Mi Note 10 released with the 108MP camera. The main focus of this phone is Huge camera MP size and Quad camera Setup. But, in the specs-wise, even if it doesn’t have the Flagship level processor, the 730G processor is not bad. Performance-wise we can say, It can perform like Snapdragon 835 processor. Also, With the 6 GB RAM, It can utilize the full potential. Unless you hate MIUI and want to flash the Custom ROM, stay with the official OS. If you are a regular user, I advise you to use the MIUI. It is not bad. You will get the unique features that are exclusive to this OS. The mobiles come with the Pie 9.0 version. Soo, It will get Android 10.
Xiaomi Mi Note 10 on the Table in Front Position

When you root your mobile, you will not get the official updates from Xiaomi. If you want to disable ads, I attached the link at the end of the article to do this without root. When you are a Developer and want to use Custom ROMs, you can follow the below method to achieve root on your mobile. This method is based on TWRP Custom Recovery- Orange. It will have all the features and some extra features that are not available in the TWRP.

Why should you Root Xiaomi Mi Note 10?

We thank the TWRP team, MIUI Forum Member, and XDA Developer- AtomSand. Without the TWRP developer’s work, this process can’t happen. If you want to root your mobile, you should have a proper reason, and you know what you are doing. Yes, with a minimum of 6 GB RAM and Qualcomm SDM730 Snapdragon 730G processor, You can use this mobile without root for 2-3 Years. It is an exclusive gaming phone compare with the regular 730 chipsets. Don’t root because everybody is saying when root your mobile it can become fastest. No. Rooting is to extract some performance from the device. But, you already have Powerful specs and software. So, If you are addicted to some root apps, you can root. But, if you want to test, I won’t recommend it.

How to Root Xiaomi Mi Note 10 Pie 9.0

Xiaomi Mi Note 10 International Variants comes with a flexible bootloader other than some locked devices. Example- In Samsung, Verizon mobiles come with locked Bootloader. This means that different smartphone variants can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike.

TWRP recovery is a custom recovery file that must be installed on your devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Xiaomi Mi Note 10. However, the tool required for rooting this device is the Magisk App.

With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your Mi Note 10 to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.

Things to check out for;

  • Make sure your device battery is charged above 50%

  • Backup your current files and data, full data loss process (save them on external storage).

Pre-Requirement StepsOnePlus 6T OEM Unlock and USB Debugging

  • Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode, OEM Unlock. There is no complicated process in Xiaomi Mi Note 10.

  • Also, download the ADB drivers. Install it on your PC.

  • Download Magisk.Zip (Latest Version) and Copy it to Your Phone SD Card or External Storage Using OTG Cable.
  • Download and save the TWRP Recovery on your PC and rename the recovery file to recovery.img. Copy this file to the folder where you installed ADB and Fastboot.

  • Download lazyflasher-no-verity-opt-encrypt.zip and Save it in your mobile SD Card. (Optional). By default, you won’t face any decryption issues. If you encounter problems, you can flash this file.

Unlock Bootloader using ADB and Fastboot

  • Enter your Mobile details like phone number, IMEI, reason. You will get the confirmation code on your mobile. Enter the confirmation code on the Mi website and request for unlocking. You will receive a confirmation mail after the approval in 2-10 Days.

Mi Flashtool Installation

 

  • Install the Mi Flash Tool in the received mail. Log in with your Same Mi Account, which used to get the Software.

Mi Flash Tool Unlock

  • Switch off your device. Connect your mobile to the PC. Then, enter into Fastboot mode. To do this; Press and hold down the Volume Down + Power buttons at the same time for some time. It will boot your mobile into Fastboot mode.
  • After you successfully boot into Fastboot mode, Select Unlock. It will take 2-3 minutes to finish the process. After the successful process completion, Reboot your mobile.Xiaomi Redmi Note 7 Fastboot

  • Check again enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode, OEM Unlock. Sometimes they disabled themselves after the boot.

Flash TWRP

Xiaomi Mi Note 10 Fastboot Mode

  • Switch off your device. Connect your mobile to the PC. Then, enter into Fastboot mode. To do this; Press and hold down the Volume Down + Power buttons at the same time for some time. It will boot your mobile into Fastboot mode.
  • Now, connect the Xiaomi Mi Note 10 mobile to the computer via USB cable.

  • Launch the fastboot on your computer. Open a Command prompt on your PC and type below command.

  • fastboot flash recovery recovery.img

fastboot flash recovery command

  • Don’t boot into Normal OS. Type the below command to Boot into TWRP.

  • fastboot reboot recovery
  • After the process complete, It will boot into the temporary TWRP. If you can’t boot into TWRP, press and Hold Volume Up Button Until TWRP appears. Don’t Boot into standard OS until we flash magisk.

Install Magisk, lazy flasher and Disable Force Encryption Treble in your Xiaomi Mi Note 10 using TWRP

Xiaomi Redmi K20 Pro TWRP

  • Select Wipe->Advance Wipe->Select Cache Data.
  • Return to Home of TWRP select Install.
  • Select the lazy flasher-no-verity-opt-encrypt.zip (Optional).
  • After the Installation Again, navigates to Home and Select Install. Select Magisk.zip. After the successful installation, Reboot your mobile.
  • Don’t use Add more zips option. Install files one by one.

What More?

Xiaomi Mi Note 10 has a minimum of 6 GB RAM of RAM. It is a Good Upper Mid-Range phone with a reasonable price; When you want to use Google Camera Mods, To utilize the 108MP camera, You can do this without root. If you feel you have not sufficient RAM, Refer- How much RAM you need. There are Major regular updates and monthly updates from Xiaomi for a long duration. If you compare it with Old devices, they still receiving updates. So, you know what you are doing and the real purpose, you can root your device. If you want to disable Ads, you can use other methods, which doesn’t require root. Xiaomi promised to optimize these Ads in the upcoming versions.

Source, (2)

Also Read-  Root Samsung Galaxy J7 Pro 2017 SM-J730F/FM/G/GM Nougat, Oreo using TWRP
Share This Post:

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.